Custom_mesh et Ortho4XP v1.3

[JLD95]

Bonsoir,

j'ai un fichier patch.osm qui est censé fonctionner avec Ortho4XP. Dans les options d'Ortho4XP, je positionne la variable custom_dem sur ce fichier mais au lancement de la génération de la tuile, Ortho4XP me dit:

Loading elevation data and smoothing it over airports. ERROR: in reading C:/Users/Jean-Luc/Desktop/patch.osm -> replaced with zero altitude.
* Min altitude: 0.0 , Max altitude: 0.0 , Mean: 0.0
Auto-patched 38 runways and 33 pieces of taxiway.
Flattened 21 helipads.

Ce fichier patch.osm débute par:

<?xml version='1.0' encoding='UTF-8'?>

<osm version='0.6' generator='JOSM'>

<node id='-38978' action='modify' visible='true' lat='42.5716149863' lon='12.58707045972' />
......

Il doit manquer une étape de conversion ?

[jasum]

Bonsoir,

j'ai un fichier patch.osm qui est censé fonctionner avec Ortho4XP. Dans les options d'Ortho4XP, je positionne la variable custom_dem sur ce fichier mais au lancement de la génération de la tuile, Ortho4XP me dit:

Loading elevation data and smoothing it over airports. ERROR: in reading C:/Users/Jean-Luc/Desktop/patch.osm -> replaced with zero altitude.
* Min altitude: 0.0 , Max altitude: 0.0 , Mean: 0.0
Auto-patched 38 runways and 33 pieces of taxiway.
Flattened 21 helipads.

Ce fichier patch.osm débute par:

<?xml version='1.0' encoding='UTF-8'?>

<osm version='0.6' generator='JOSM'>

<node id='-38978' action='modify' visible='true' lat='42.5716149863' lon='12.58707045972' />
......

Il doit manquer une étape de conversion ?

Salut 3LD95

un fichier patch.osm n'est pas un "dem" (digital elevetion model)

Le fichier patch.osm doit être placé dans un sous-dossier (correspondant à ta tuile) du dossier Patches de Ortho4XP, par exemple:

Ortho4XP >> Patches >> +45+006 >> LFHU.patch.osm pour l'altiport des Alpes d'Huez

Consulte le tuto Ortho4XP-Patch de la Dropbox d'Oscar (dossier Manuals)

https://www.dropbox.com/sh/cjjwu92mausoh04/AACt-QzgMRwKDL392K_Ux3cPa?dl=0

[JLD95]

Super, merci bien.

[JLD95]

Bonjour,

après essai, il semble que Ortho4XP ne prenne pas mon patch en compte.
J'ai placé le patch sous Ortho4XP1.3\Patches\+42+012\LIAA.patch.osm

Je teste en lançant l'étape 1 comme indiqué dans le manuel, pas d'erreurs mais pas de mention du patch comme indiqué dans le manuel.

Batch build launched for a number of 1 tiles.Dealing with tile 1 / 1 : +42+012


Step 1 : Building vector data for tile +42+012 :
--------


-> Dealing with airports
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_airports.osm.b z2
LIAA Aviosuperficie Alvaro Leonardi 1 runway , lat= 42.57, lon= 12.59
LIAF Aeroporto di Foligno "Giorgio Franceschi" 3 runways, lat= 42.93, lon= 12.71
LIAR Aeroporto di Furbara boundary , lat= 41.99, lon= 12.01
LIQN Aeroporto di Rieti 2 runways, lat= 42.43, lon= 12.85
LIRB Aeroporto "Luigi Bourlot" boundary , lat= 42.08, lon= 12.22
LIRV Aeroporto di Viterbo "Tommaso Fabbri" 3 runways, lat= 42.44, lon= 12.07
PGCRT Ali Libere 1 runway , lat= 42.83, lon= 12.68
PGGCT Aviosuperficie del Sagrantino 1 runway , lat= 42.89, lon= 12.53
PGMAR CdV "Peter Pan" 1 runway , lat= 42.97, lon= 12.37
PGPNT Avioclub Pantalla 1 runway , lat= 42.87, lon= 12.38
PGSTR Aviosuperficie dei Monti Martani 1 runway , lat= 42.86, lon= 12.47
RIVAL A/S Rieti Vallesanta 1 runway , lat= 42.43, lon= 12.81
RMANG Aviosuperficie Anguillara Sabazia 1 runway , lat= 42.07, lon= 12.26
RMCAP Aviosuperficie Roma Nord 1 runway , lat= 42.12, lon= 12.60
RMCMP A/S Avio Celsetta 3 runways, lat= 42.12, lon= 12.36
RMFIA Aviosuperficie Fiano Romano 2 runways, lat= 42.14, lon= 12.63
RMFRM Aviosuperficie Pantano 2 runways, lat= 42.13, lon= 12.63
TR02 CdV Palazzone di Narni 1 runway , lat= 42.54, lon= 12.55
TR06 CdV Calledro 1 runway , lat= 42.47, lon= 12.43
TR09 A/S Ocria 1 runway , lat= 42.43, lon= 12.46
VT10 Aviosuperficie di Nepi 1 runway , lat= 42.25, lon= 12.31
VT15 A/S Umiltà 1 runway , lat= 42.19, lon= 12.33
VTCOR A/S Santa Bruna 1 runway , lat= 42.38, lon= 12.34
VTSOR A/S Aviosoriano 1 runway , lat= 42.43, lon= 12.29
VTSUT Aviosuperficie Vallicella di Sutri 1 runway , lat= 42.22, lon= 12.25
VTVEJ Aviosuperficie Alituscia 1 runway , lat= 42.23, lon= 12.12
**** 1º Reggimento di sostegno AVES "Idra" boundary , lat= 42.08, lon= 12.08
**** Aviosuperficie Easy Fly 1 runway , lat= 42.13, lon= 12.61
**** Campo di Volo Acquasparta 1 runway , lat= 42.68, lon= 12.55
**** Campo di volo Fly Sabina 1 runway , lat= 42.12, lon= 12.71
**** **** 2 runways, lat= 42.01, lon= 12.70
Loading elevation data and smoothing it over airports.
* Min altitude: -2.0 , Max altitude: 2194.0 , Mean: 423.32367
Auto-patched 38 runways and 33 pieces of taxiway.
Flattened 21 helipads.
Number of edges at this point: 6749
-> Dealing with roads
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_big_roads.osm. bz2
* Checking which large roads need levelling.
* Buffering banked road network as multipolygon.
Encoding it.
* Encoding the remaining primary road network as linestrings.
Number of edges at this point: 180070
-> Dealing with coastline
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_coastline.osm. bz2
Number of edges at this point: 180070
-> Dealing with inland water
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_water.osm.bz2
* Building water multipolygon.
Cleaning it.
Encoding it.
Number of edges at this point: 197738
-> Inserting edges related to the orthophotos grid
-> Inserting additional boundary edges for gluing
-> Transcription to the files ..\Tiles\zOrtho4XP_+42+012\Data+42+012.poly and .node


Final number of constrained edges : 253411


Completed in 1m38sec.
__________________________________________________ _______________________________________________
Batch process completed in 1m38sec



Pour avoir la prise en compte du patch, que faut-il faire en plus de mettre le patch sous Ortho4XP1.3\Patches\+42+012 ?

[JLD95]

J'ai trouvé mais le manuel doit être corrigé:

1/ "Ce fichier sera à placer dans le dossier Patches -> le dossier Lat/lon de votre future tuile. Sil n'existe pas encore, créez-le": il faut avant un sous-dossier Lat10°/Lon10° qui comprend le dossier Lat/lon.

Pour mon exemple, j'ai mis Ortho4XP1.3\Patches\+40+010\+42+012\LIAA.patch.osm

2/ Le rapport de l'étape 1:

En revanche, si tout bien, la liste des patches apparaîtra en fin de Step 1: ce n'est pas en fin chez moi mais au milieu:


Batch build launched for a number of 1 tiles.
Dealing with tile 1 / 1 : +42+012


Step 1 : Building vector data for tile +42+012 :
--------


-> Dealing with airports
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_airports.osm.b z2
LIAA Aviosuperficie Alvaro Leonardi 1 runway , lat= 42.57, lon= 12.59
LIAF Aeroporto di Foligno "Giorgio Franceschi" 3 runways, lat= 42.93, lon= 12.71
LIAR Aeroporto di Furbara boundary , lat= 41.99, lon= 12.01
LIQN Aeroporto di Rieti 2 runways, lat= 42.43, lon= 12.85
LIRB Aeroporto "Luigi Bourlot" boundary , lat= 42.08, lon= 12.22
LIRV Aeroporto di Viterbo "Tommaso Fabbri" 3 runways, lat= 42.44, lon= 12.07
PGCRT Ali Libere 1 runway , lat= 42.83, lon= 12.68
PGGCT Aviosuperficie del Sagrantino 1 runway , lat= 42.89, lon= 12.53
PGMAR CdV "Peter Pan" 1 runway , lat= 42.97, lon= 12.37
PGPNT Avioclub Pantalla 1 runway , lat= 42.87, lon= 12.38
PGSTR Aviosuperficie dei Monti Martani 1 runway , lat= 42.86, lon= 12.47
RIVAL A/S Rieti Vallesanta 1 runway , lat= 42.43, lon= 12.81
RMANG Aviosuperficie Anguillara Sabazia 1 runway , lat= 42.07, lon= 12.26
RMCAP Aviosuperficie Roma Nord 1 runway , lat= 42.12, lon= 12.60
RMCMP A/S Avio Celsetta 3 runways, lat= 42.12, lon= 12.36
RMFIA Aviosuperficie Fiano Romano 2 runways, lat= 42.14, lon= 12.63
RMFRM Aviosuperficie Pantano 2 runways, lat= 42.13, lon= 12.63
TR02 CdV Palazzone di Narni 1 runway , lat= 42.54, lon= 12.55
TR06 CdV Calledro 1 runway , lat= 42.47, lon= 12.43
TR09 A/S Ocria 1 runway , lat= 42.43, lon= 12.46
VT10 Aviosuperficie di Nepi 1 runway , lat= 42.25, lon= 12.31
VT15 A/S Umiltà 1 runway , lat= 42.19, lon= 12.33
VTCOR A/S Santa Bruna 1 runway , lat= 42.38, lon= 12.34
VTSOR A/S Aviosoriano 1 runway , lat= 42.43, lon= 12.29
VTSUT Aviosuperficie Vallicella di Sutri 1 runway , lat= 42.22, lon= 12.25
VTVEJ Aviosuperficie Alituscia 1 runway , lat= 42.23, lon= 12.12
**** 1º Reggimento di sostegno AVES "Idra" boundary , lat= 42.08, lon= 12.08
**** Aviosuperficie Easy Fly 1 runway , lat= 42.13, lon= 12.61
**** Campo di Volo Acquasparta 1 runway , lat= 42.68, lon= 12.55
**** Campo di volo Fly Sabina 1 runway , lat= 42.12, lon= 12.71
**** **** 2 runways, lat= 42.01, lon= 12.70
Loading elevation data and smoothing it over airports.
* Min altitude: -2.0 , Max altitude: 2194.0 , Mean: 423.32367
Patching LIAA.patch.osm
Auto-patched 37 runways and 18 pieces of taxiway.
Flattened 21 helipads.
Number of edges at this point: 6460
-> Dealing with roads
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_big_roads.osm. bz2
* Checking which large roads need levelling.
* Buffering banked road network as multipolygon.
Encoding it.
* Encoding the remaining primary road network as linestrings.
Number of edges at this point: 179781
-> Dealing with coastline
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_coastline.osm. bz2
Number of edges at this point: 179781
-> Dealing with inland water
* Recycling OSM data from ..\OSM_data\+40+010\+42+012\+42+012_water.osm.bz2
* Building water multipolygon.
Cleaning it.
Encoding it.
Number of edges at this point: 197449
-> Inserting edges related to the orthophotos grid
-> Inserting additional boundary edges for gluing
-> Transcription to the files ..\Tiles\zOrtho4XP_+42+012\Data+42+012.poly and .node


Final number of constrained edges : 253130


Completed in 1m38sec.
__________________________________________________ _______________________________________________
Batch process completed in 1m38sec

[jasum]

Oui , le manuel est celui de la version Ortho4XP précédente, mais l'utilisation est identique.