Annonce

Réduire
Aucune annonce.

Justflight BAe 146 en demo

Réduire
X
 
  • Filtre
  • Heure
  • Afficher
Tout nettoyer
nouveaux messages

  • X-Plane 11.x Justflight BAe 146 en demo

    Hello,

    Une initiative plutôt sympa pour le nouveau Bae146 de Justflight, l'éditeur propose une version démo de l'appareil avec des restrictions en temps, distance, altitude et vitesse.




    Remi
    Remi
    Bordeaux
    X Plane 11 - Amd 3900X - RTX 3070Ti 8Go - 32 Go DDR4 - Windows 10

  • #2
    Merci Remi.
    Je m'en vais tester cet avion qui avait déjà connu ces heures de gloire sur X-Plane.
    On verra si ça vaut le coup, surtout côté émulation systèmes et FMS.
    Sarkis
    Mac Studio M2 Max - 64 Go de mémoire unifiée - SSD de 512 Go​ - Ecran PC LG UltraFine 32 - Saitek X52 Ro&Ro - X-Plane 12

    Commentaire


    • #3
      L'Embraer BAe 146 de JustFlight vient de passer en v1.2 (16 septembre 2021).
      Mise à jour via le SkunkCrafts Updater.

      Détail de cette mise à jour:
      version 1.2 :
      - Included UFMC (Custom FMC) support
      - Included support for 3rd party RealityXP GTN750 in 3D cockpit
      - Fixed windshield reflections (no more "ghosting" of taxi lines or exterior reflections)
      - Improved ASI bug manipulator logic
      - Reconfigured positions of instrument displays for better use of panel texture space
      - Created click spot on weather radar screen for 2D pop-up window.
      - Improvements to TMS: Pressing an active mode or TOGA button will return TMS to standby and freeze actuators in place
      - Improved TMS actuator simulation: blue up-arrows and white down-arrows will correctly show whether the pilot needs to increase or decrease throttles
      - TMS actuators will now remain centered when the thrust levers are at idle
      - TMS actuators movement rate is no longer dependent on frame rate
      - Fixed engines #3 and #4 low oil temperature in flight after a cold-and-dark start
      - Added custom commands for the throttle latches, eg. "thranda/switches/ThrottleLatch0"
      - Improved yaw damper control authority
      - Changed pulsating beacon to flashing beacon
      - Improved Engine Overspeed test: If N1 is between 26 and 40%, this will shut down the engine. This can be reset by either re-starting the engine, or powering down the ESS DC bus.
      - Fixed missing FUEL TRANSFER annunciators. They will now properly indicate the center tank transfer valve positions.
      - Add missing altitude alert tones
      - Fixed ghosting markers on clock
      - Re-mapped TOGA button on throttles
      - Oxygen test now requires oxygen valve to be open.
      - Added Ground Power Unit model.
      - Fixed potential negative values for airbrake angle when cold and dark with a tail wind.
      - Added limiters to the fuel clickspots in the tablet to prevent over-filling.
      - Reduced fuel flow at idle
      - Fixed transponder code resetting to previous value if ENT key was pressed after entering the code
      - Fixed interior of combi cargo version (Left Door closed from the inside)
      - Fixed TMS error when adjusting TGT temp in TGT mode.
      - Allowing for volume adjustments on vol knobs that are pushed in.
      *** Jean-Pierre ***
      -----
      Mes Checklists pour le plugin Xchecklist => https://forums.x-plane.org/index.php...downloads_file
      X-Plane v12.0.9-rc5 - Windows 10 Pro // Portable MSI GS75 Stealth double écran ; RAM : 32 Go DDR4 @ 3200 MHz ; CPU: I9-10980HK @ 5.3 GHz ; GPU: Nvidia Geforce RTX 2080 Super - VRAM 8 Go ; 1 disque SSD : 2 To // Thrustmaster HOTAS Warthog + Saitek Throttle Quadrant + palonnier MFG Crosswing // TrackIR_5

      Commentaire


      • #4
        Nouvelle version pour l'Embraer BAe 146 de JustFlight: la v1.2.3
        Mise à jour via le plugin SkunkCrafts Updater.

        Détails de cette mise à jour:

        October 2021

        v1.2.3

        UFMC fixes:
        - RTE LEGS page number not updating
        - HDG mode does not work with FPLN loaded
        - Acceleration altitude missing from FMC. Added to Takeoff REF PAGE #2
        - Level off at MCP altitude on GS. On GS engaged the Aircraft levelled off at MCP Altitude
        - Blocking MCP altitude on RNAV APP. At RNAV approach the MCP altitude was not possible to change
        - VS/IAS flickering on RNAV approach
        - IAN approach MCP altitude problem fixed
        - Distance readout and groundspeed not working after C&D start
        - Takeoff N1 value. Now N1 At takeoff match the Aircraft value
        - VNAV Altitude correct behaviour.

        RNAV mode fixes:
        - AP will be in RNAV mode if any of the HSI switchover switches (pilot or copilot) is in the RNAV position
        - LNAV and VNAV only works in RNAV mode
        - If VNAV or LNAV is engaged, if the HSI switchover is changed to NAV, VNAV and LNAV will disengage
        - When an RNAV approach is selected on the Approach PAGE, when close to the IAF waypoint, you have to press GS AP button to arm the RNAV approach. The status will change from White to green when it engages the approach.
        - When a VOR, LOC or GLS approach is selected, when close to the IAF Waypoint, you have to press GS AP button to arm the approach, GS and V/L will arm. Because these approaches uses V/L AP mode (need tune the proper navigation frequency) you have to change the switchover to NAV (both ot them) to let the autopilot engage the V/L mode and perform the approach
        - For ILS approaches you have to change from RNAV to NAV to capture the LOC and GS path
        *** Jean-Pierre ***
        -----
        Mes Checklists pour le plugin Xchecklist => https://forums.x-plane.org/index.php...downloads_file
        X-Plane v12.0.9-rc5 - Windows 10 Pro // Portable MSI GS75 Stealth double écran ; RAM : 32 Go DDR4 @ 3200 MHz ; CPU: I9-10980HK @ 5.3 GHz ; GPU: Nvidia Geforce RTX 2080 Super - VRAM 8 Go ; 1 disque SSD : 2 To // Thrustmaster HOTAS Warthog + Saitek Throttle Quadrant + palonnier MFG Crosswing // TrackIR_5

        Commentaire

        Chargement...
        X