Annonce

Réduire
Aucune annonce.

Update v1.01 X-crafts e-jets famille disponible

Réduire
X
 
  • Filtre
  • Heure
  • Afficher
Tout nettoyer
nouveaux messages

  • Update v1.01 X-crafts e-jets famille disponible

    Il est indiqué de re-downloader a partir de votre account sur l'org store

    v1.0.1 Release Notes


    PLUGINS
    • Autothrottle toggle button - was inoperative in some situations. - fixed
    • Unexplained zero percent TRS (Thrust Reduction Setting) on a cruise - fixed
    • Improved TRS page functionality - all functions will cancel AUTO, and AUTO will now always show the correct current TRS setting
    • CLB may now be selected during departure, even if FLAPS 1 or FLAPS 2 are still deployed.
    • Slightly increased CLB thrust for slightly better climb performance
    • Reduced sensitivity to autopilot fly-ups when close to Vne. Also restricting fly-up protection to descents.
    • Fuel predictions on PROGRESS no longer vary wildly.
    • MacOS CTD on cold/dark load attempts

    COCKPIT IMPROVEMENTS
    • The bank angle is restricted after switching BANK off - Fixed!
    • Unable to close popped-out MFD screen - Fixed, you will always be able to click on the VSD to toggle the popup even with dropdown menus open
    • Added pop-up screens also to the FO side
    • Added transmitting for VHF1 and VHF2 to the radios
    • Increased the brightness of cockpit panel lights, making them more visible in XP12 during the day. Please use the dimming knobs to dim them down at night as they may appear too bright. This is a workaround while we wait for X-Plane 12 to render the cockpit more luminous.
    • Removed FD from the standby Display
    • Windshield heater strips are a bit less dark to reflect the real color
    • There was a black triangle next to the windshield heaters - fixed
    • Fixed the V/L button on the FO side to work just like the one on the CA side

    PFD
    • Takeoff VSpeeds Disappearing - Fixed
    • BARO minimums were limited to 2000 MSL - Fixed
    • Minimums (including the bug on the tape) are not visible anymore when on the ground

    CABIN PRESSURIZATION
    • Fixed the unexpected CABIN PRESSURE HIGH warning on descents
    • Improved automatic cabin pressure management.
    • Added manual control of cabin pressure (the switch is not yet animated but it works if you switch control to MANUAL)
    • Implemented CABIN PRESSURE DUMP switch

    EFB
    • EFB not loading on some versions of Linux - fixed
    • Fuel capacity corrected in the perf databases for the E190 and E195

    EXTERIOR
    • Fixed cargo bays not being properly aligned with the doors
    • The Cargo door opening instructions on the E170 AFT door fixed

    VR
    • APU Switch should now be functional for the START position
    MSI Z97 Gaming 5 - Intel I7 4790K - Artic cooling freezer 7 pro rev 2 - GSKILL 32 GO - SSD Crucial M5 120 go - HDD western digital caviar blue 1 TO - Gigabyte GTX 1070 gaming G1 - Windows 10 home 64 bits - XPlane 11.55 + XPlane 12 on Crucial SSD 2To

  • #2
    Update v 1.02 disponible :

    v1.0.2 AUTOPILOT & AUTOTHROTTLE
    - The throttle animation was fixed. They are not separate and they move backward in reverse
    - AT stability improved in X-Plane 12. Still not perfect, but should be much better now than before.
    - The reaction of FLCH climb/descent rates slowed down a bit
    SYSTEMS IMPROVEMENTS
    - Engine Start at high temperatures fixed - Engines should now always start under normal conditions
    - Flaps 1 and 2 now take much longer to extend, as per the real aircraft
    - Fixed Fuel Crossfeed switch which wasn’t working
    - The right Radio is now off in DC power, left one is powered
    - Fixed sterile lights switch not moving on DC power
    - Wing Ice Protection switch indication fixed
    PFD
    - Added a preceding zero to the altitude dial for FL values lower than FL100 as on the real aircraft
    - The speed trend is now only displayed once the speed tape is live (above 30 kts)
    - Fixed speed tape showing incorrect value while the aircraft is stationary in strong ground winds
    - Fixed VS indication not clearing on the PFD when switching from VS to FLCH (VNAV) mode during the climb
    - Enhanced the APPR1/APPR2 modes on the PFD:
    - APPR 1 (CAT I ) will be Engaged and green if the following conditions are met:
    - Minimums are set to BARO
    - Flaps are set to 5 or FULL
    - Radio altitude is less than 1500ft
    - APPR 2 (CAT II ) will be Engaged and green if the following conditions are met:
    - Minimums are set to RA
    - Flaps are set to 5 or FULL
    - Radio altitude is less than 1500ft
    MFD
    - Brake temperatures now display correctly, and the temperature now increases after braking. It will take around 15 minutes to cool off after applying full brakes on landing. This is only available in X-Plane 12.
    - Fixed temperatures sometimes incorrectly showing 0°C on the ANTI ICE page
    - Fixed last waypoint on missed approach missing identifier on VSD.
    - Fixed crash when plugins provide bad TCAS aircrafts data.
    - Fixed north-up map not orientated to true north on the PLAN.
    - Fixed VSD focus waypoint out of order in some situations.
    - Fixed reversed left/right of track indicator.
    - Fixed CTD when perf available with no flight plan.
    - Fixed TOD drawn over TOC on VSD with short flight plans.
    - Fixed TOD position inaccurate on VSD with some flight path angles.
    - EICAS
    - Fixed OIL PRESS being too high in X-Plane 12
    - Fuel flow for left engine displayed in tens, not single digits as on the real aircraft
    EFB
    - Fixed airport database filtering out non-IFR airports. There should be no more issues finding an airport
    - Fixed: No explicit connection timeout set on libcurl requests. (For Linux users)
    - Fixed: Status bar showed wrong day
    SOUNDS
    - No smoking and seatbelt sounds no longer play when there is no battery power.
    - Park brake sound now only makes sound when the handle moves.
    - Fixed a typo that was preventing the oxygen supply test from working on the 190, 95, and Lineage.
    - Interior APU sounds are now working as intended.
    - Sound now fades in when sim is unpaused, or when returning from a menu screen.
    - Added interior cabin electrical to the rear of the cabin.
    - Added engine windmilling sound when engines are off (X-Plane 12 only)
    - Added 1000, 500, 200, and 100 callouts. (Sounds generously provided by Mango Studios)
    - Rebuilt the packs event to more closely match the functionality of the real plane
    - Rebuilt avionic fans to be more consistent.
    - Rebuilt touchdown sounds to happen independently as each gear touches down.
    - Added interior engine start sounds.
    - Fixed cabin/cockpit rattle sounds that were not playing properly.
    TEXTURES
    - Yellow-Black stripes under engine starters not visible without FLOOD/STORM lights
    VR
    - Revised all the VR hotspots for both X-Plane 11 and X-Plane 12
    MSI Z97 Gaming 5 - Intel I7 4790K - Artic cooling freezer 7 pro rev 2 - GSKILL 32 GO - SSD Crucial M5 120 go - HDD western digital caviar blue 1 TO - Gigabyte GTX 1070 gaming G1 - Windows 10 home 64 bits - XPlane 11.55 + XPlane 12 on Crucial SSD 2To

    Commentaire


    • #3
      Quelqu'un a-t-il acheté le pack son Mango pour savoir si ça vaut le coup (coût)?
      Hervé

      PC monté par mes soins (en 2023) :

      - Carte Mère Gigabyte Z690 Aorus Elite DDR4
      - CPU Intel i5 13600K
      - CG AMD Sapphire RX6950XT Nitro+ 16Gb
      - 32 Go de RAM DDR4 (3600MHz C16) Corsair Vengeance LPX
      - SSD NVMe PNY XLR8 CS3030 1To pour Windows 11 Pro 64bits
      - SSD NVMe Samsung 970 EVO PLUS 1To pour X-Plane 12
      - SSD NVMe Samsung 980 PRO 1To pour MSFS2020
      - SSD 2To pour Scènes, librairies et autogen
      - HDD 1To pour addons ORBX
      - HDD Externe 5To pour orthophotos Europe

      Version : 12.2.0

      Commentaire

      Chargement...
      X